| Peer-Reviewed

Planning of Preventive Maintenance Time Interval on Rubber Tyred Gantry Unit Using Relability Centered Maintenance (RCM) II

Received: 8 March 2022     Accepted: 25 March 2022     Published: 27 September 2022
Views:       Downloads:
Abstract

PT Pelabuhan Indonesia (Persero) is one of the gateways for ships and goods both domestically and export-import. In the operation of the Rubber Tyred Gantry (RTG), several cases of problems were encountered that could hinder or disrupt the loading and unloading process caused by the incompatibility of the maintenance schedule provided by the company for the equipment used. The purpose of this study is to determine the time schedule for the maintenance interval of the Rubber Tyred Gantry unit on critical components that often experience damage, and determine a maintenance strategy to anticipate sudden damage to critical components. This study uses the Reliability Centered Maintenance (RCM) II method with critical component analysis using Failure Mode and Effect Analysis (FMEA). The results of this study are maintenance intervals based on the RCM II Decision Worksheet for critical components that have potential failures, including Engine components with preventive maintenance intervals every 16 days a month or 23 times a year, Spreader components with preventive maintenance intervals every 10 days a month. or 36 times a year and Trolly Brake components with preventive maintenance intervals every 13 days a month or 28 times a year during machine operating hours and Strategies to reduce damage to RTG units based on the RCM II Decision Worksheet on RTG unit maintenance using a preventive maintenance strategy by a combination of corrective maintenance where preventive maintenance is carried out according to a predetermined maintenance interval schedule and corrective maintenance is carried out by preparing spare parts that must be replaced when carrying out preventive maintenance checks.

Published in Industrial Engineering (Volume 6, Issue 1)
DOI 10.11648/j.ie.20220601.11
Page(s) 1-6
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Critical Components RTG, Failure Mode and Effect Analysis, Reliability Centered Maintenance (RCM) II

References
[1] Asripa, ashury, and firman husain. 2019. “analysis of container handling systems in containers.” 76–85.
[2] Atma, and hediyanto. 2017. “best practice corrective maintenance activities for bearing damage on millac 5h 6p machines based on knowledge conversion.” Proceedings of snti and satellite 2017 2017 (july 2018): c1-7.
[3] Banghart, marc, and kari babski-reeves. 2018. “subjectivity in failure mode effects analysis (fmea) severity classification within a reliability centered maintenance (rcm) context.” International journal of aviation, aeronautics, and aerospace 5 (1).
[4] Ela patriana & nurismalatri, 2018. 2008. “jurnal teknologi, jurusan teknik industri, fakultas teknologi industri, ist akprind yogyakarta.” [technology journal, department of industrial engineering, faculty of industrial technology, ist akprind Yogyakarta] المجلد 49 (1): 11. Https://www.bertelsmannstiftung.de/fileadmin/files/bst/publikationen/grauepublikationen/mt_globalization_report_2018.pdf%0ahttp://eprints.lse.ac.uk/43447/1/india_globalisation%2csocietyandinequalities%28lsero%29.pdf%0ahttps://www.quora.com/what-is-the.
[5] Ibrahim, taiyeb. 2019. “maintenance of decision engineering programs in the distribution of sea water pump in pt. Kmi with the rcm-ii approach.” International journal of engineering, information science and applied sciences (ijeis-as 2 (1): 1–10. https://journal.stkipsingkawang.ac.id/index.php/ijeis-as/article/view/907.
[6] Kurniawan, and rani. Complicated. 2014. “urbannyte engine maintenance system planning using reliability centered maintenance ii (rcm ii) method.” Undip journal 3 (4): 1–8.
[7] Munawir, hafidh, dan dani yunanto. 2014. “analisa penyebab kerusakan mesin sizing baba sangyo kikai dengan metode fmea dan lta (studi kasus di pt primatexco indonesia).” [analysis of the causes of damage to the Baba Sangyo Kikai sizing machine using the FMEA and LTA methods (case study at PT Primatexco Indonesia)]. Seminar nasional ienaco: 296–302.
[8] Nasution, hamidah, dan shinta martina. 2013. “teknik sipil- institut teknologi medan.[ civil engineering-field technology institute].
[9] Padhil, A., Pawennari, A., Dahlan, M., & Awaliah, N. R. (2018). “Usulan Perbaikan Lingkungan Kerja Pada Bagian Mesin Puffing Gun Di Ikm Bipang Putri Sehati Kabupaten Gowa”. [Proposed Improvement of the Working Environment on Puffing Gun Machine Parts at Ikm Bipang Putri Sehati, Gowa Regency]. Journal of Industrial Engineering Management, 3 (1), 1. https://doi.org/10.33536/jiem.v3i1.197
[10] Rislamy, achmad fany, nina aini mahbubah, dan dzakiyah widyaningrum. 2020. “juli 2020 analisis risiko kerusakan pada alat berat grab dengan metode failure mode and effect analysis (study kasus : pt siam maspion terminal gresik “[july 2020 analysis of the risk of damage to heavy grab equipment with the failure mode and effect analysis method (case study: pt siam maspion terminal gresik)].” 8 (1).
[11] Sajaradj, zulaikha, listiani nurul huda, dan sukaria sinulingga. 2019. “the application of reliability centered maintenance (rcm) methods to design maintenance system in manufacturing (journal review).” Iop conference series: materials science and engineering 505 (1).
[12] Supriyadi, supriyadi, resa miftahul jannah, and rizal syarifuddin. 2018. “centrifugal machine maintenance planning using the reliability centered maintenance method at refined sugar companies.” Jisi: journal of industrial system integration 5 (2): 139–47.
[13] Suwandy. R, 2019. “Analisa perawatan mesin digeste dengan metode reliability centered maintenance (rcm) pada ptpn ii pagar merbau. Skripsi. Medan: univeritas medan area”. [Analysis of digeste machine maintenance using the reliability centered maintenance (rcm) method at PTPN II Pagar Merbau. Essay. Medan: field university area].
[14] Yanuar, almira rahma, and bambang purwanggono. 2015. “proposed optimal treatment program using reliability centered maintenance ii (rcm ii) system in p1 filling point ii filling shed i system (case study of tbbm semarang group pt. Pertamina (persero) supply & distribution region iv central java area.” Journal of industrial engineering 4 (1): 1–7.
[15] Zein, ikramullah, dewi mulyati, and ilham saputra. 2019. “planning for compressor engine maintenance at pt. Es muda perkasa with the reliability centered maintenance (rcm) method.” Journal of serambi engineering 4 (1): 388.
Cite This Article
  • APA Style

    Ahmad Padhil, Haswika, Abdul Mail. (2022). Planning of Preventive Maintenance Time Interval on Rubber Tyred Gantry Unit Using Relability Centered Maintenance (RCM) II. Industrial Engineering, 6(1), 1-6. https://doi.org/10.11648/j.ie.20220601.11

    Copy | Download

    ACS Style

    Ahmad Padhil; Haswika; Abdul Mail. Planning of Preventive Maintenance Time Interval on Rubber Tyred Gantry Unit Using Relability Centered Maintenance (RCM) II. Ind. Eng. 2022, 6(1), 1-6. doi: 10.11648/j.ie.20220601.11

    Copy | Download

    AMA Style

    Ahmad Padhil, Haswika, Abdul Mail. Planning of Preventive Maintenance Time Interval on Rubber Tyred Gantry Unit Using Relability Centered Maintenance (RCM) II. Ind Eng. 2022;6(1):1-6. doi: 10.11648/j.ie.20220601.11

    Copy | Download

  • @article{10.11648/j.ie.20220601.11,
      author = {Ahmad Padhil and Haswika and Abdul Mail},
      title = {Planning of Preventive Maintenance Time Interval on Rubber Tyred Gantry Unit Using Relability Centered Maintenance (RCM) II},
      journal = {Industrial Engineering},
      volume = {6},
      number = {1},
      pages = {1-6},
      doi = {10.11648/j.ie.20220601.11},
      url = {https://doi.org/10.11648/j.ie.20220601.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ie.20220601.11},
      abstract = {PT Pelabuhan Indonesia (Persero) is one of the gateways for ships and goods both domestically and export-import. In the operation of the Rubber Tyred Gantry (RTG), several cases of problems were encountered that could hinder or disrupt the loading and unloading process caused by the incompatibility of the maintenance schedule provided by the company for the equipment used. The purpose of this study is to determine the time schedule for the maintenance interval of the Rubber Tyred Gantry unit on critical components that often experience damage, and determine a maintenance strategy to anticipate sudden damage to critical components. This study uses the Reliability Centered Maintenance (RCM) II method with critical component analysis using Failure Mode and Effect Analysis (FMEA). The results of this study are maintenance intervals based on the RCM II Decision Worksheet for critical components that have potential failures, including Engine components with preventive maintenance intervals every 16 days a month or 23 times a year, Spreader components with preventive maintenance intervals every 10 days a month. or 36 times a year and Trolly Brake components with preventive maintenance intervals every 13 days a month or 28 times a year during machine operating hours and Strategies to reduce damage to RTG units based on the RCM II Decision Worksheet on RTG unit maintenance using a preventive maintenance strategy by a combination of corrective maintenance where preventive maintenance is carried out according to a predetermined maintenance interval schedule and corrective maintenance is carried out by preparing spare parts that must be replaced when carrying out preventive maintenance checks.},
     year = {2022}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Planning of Preventive Maintenance Time Interval on Rubber Tyred Gantry Unit Using Relability Centered Maintenance (RCM) II
    AU  - Ahmad Padhil
    AU  - Haswika
    AU  - Abdul Mail
    Y1  - 2022/09/27
    PY  - 2022
    N1  - https://doi.org/10.11648/j.ie.20220601.11
    DO  - 10.11648/j.ie.20220601.11
    T2  - Industrial Engineering
    JF  - Industrial Engineering
    JO  - Industrial Engineering
    SP  - 1
    EP  - 6
    PB  - Science Publishing Group
    SN  - 2640-1118
    UR  - https://doi.org/10.11648/j.ie.20220601.11
    AB  - PT Pelabuhan Indonesia (Persero) is one of the gateways for ships and goods both domestically and export-import. In the operation of the Rubber Tyred Gantry (RTG), several cases of problems were encountered that could hinder or disrupt the loading and unloading process caused by the incompatibility of the maintenance schedule provided by the company for the equipment used. The purpose of this study is to determine the time schedule for the maintenance interval of the Rubber Tyred Gantry unit on critical components that often experience damage, and determine a maintenance strategy to anticipate sudden damage to critical components. This study uses the Reliability Centered Maintenance (RCM) II method with critical component analysis using Failure Mode and Effect Analysis (FMEA). The results of this study are maintenance intervals based on the RCM II Decision Worksheet for critical components that have potential failures, including Engine components with preventive maintenance intervals every 16 days a month or 23 times a year, Spreader components with preventive maintenance intervals every 10 days a month. or 36 times a year and Trolly Brake components with preventive maintenance intervals every 13 days a month or 28 times a year during machine operating hours and Strategies to reduce damage to RTG units based on the RCM II Decision Worksheet on RTG unit maintenance using a preventive maintenance strategy by a combination of corrective maintenance where preventive maintenance is carried out according to a predetermined maintenance interval schedule and corrective maintenance is carried out by preparing spare parts that must be replaced when carrying out preventive maintenance checks.
    VL  - 6
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Faculty of Industrial Technology, Indonesian Muslim University, Makassar, Indonesia

  • Faculty of Industrial Technology, Indonesian Muslim University, Makassar, Indonesia

  • Faculty of Industrial Technology, Indonesian Muslim University, Makassar, Indonesia

  • Sections